Manual

 Itrovi can only be used with WWW.ITROVI.COM this to avoid confusion or fake sites.

The ITROVI manual:
Registration:
To enter a code one has to register (1)or be registered (2),
(1) register

  1. Press the right-handed button on the opening page.
  2. Complete the form and send it.
  3. You will receive the status of the labels and you can add your label to it. Tick the choice you want to use and fill in the description and the serial number.
  4. Press on “Add label”.
  5. Do not forget to log out when all changes have been made.

(2) already registered
  1. Fill in the user’s name (e-mail address) and the password.
  2. Your label status will appear and you can now add, alter or remove labels.
  3. Do not forget to log out when all changes have been made.

The ITROVI ironing labels:
Our ironing labels will stay in place for years when ironed in correctly.
Instructions for use:
  1. Make sure that your iron is preheated for at least 10 minutes to highest setting. Do not use steam.
  2. Place the label where you want to apply it.
  3. Place the baking paper (also delivered) on the label. Like this you protect your clothing against possible damage.
  4. Place the heated iron on the baking paper without touching the clothing for 30 seconds.
  5. Let the label and the baking paper cool down. Then remove the baking paper.
  6. Check whether the label is securely fitted. If not, repeat the process from step 3 onwards.

Do not wash your clothing at more than 60° C, since this can cause the labels to peel early.
Itrovi cannot be held responsible for damage to the clothing.

De ITROVI ADHESIVE LABELS:
Our adhesive labels will stay in place for years when ironed in correctly.
Instructions for use:
  1. Degrease the spot where you want to place the adhesive label. If not done properly it may casue the adhesive label to peel early.
  2. Place the adhesive label and press well.
  3. After 12 hours the glue has hardened completely and it becomes difficult to remove the label.
  4. Make sure that the label does not come into contact with sharp or abrasive materials, since this can shorten the life span of the label considerably.